Super Vega / SWAT long conical nose — Revision B — ESTIMATED
Source identity: HIST_SUPER_VEGA_SWAT

This free pack preserves the original STL and STEP geometry from the expanded
Estes Nose Cone Library B. All geometry is in millimeters.

Base diameter: 41.58 mm
Exposed height including features: 190.00 mm (excludes shoulder)
Shoulder: 40.51 mm diameter x 18.71 mm long
Overall X x Y x Z: 41.58 x 41.58 x 208.71 mm
Evidence confidence: low. This is not a numerical tolerance.

These models use educated estimates, including inferred dimensions and shapes.
They are solid exterior references for CAD editing, not verified replicas or
finished hollow flight parts. No printer clearance, original hollow interiors,
electronics or recovery hardware are included. Solid CAD does not prescribe
100% slicer infill. Digital geometry checks do not validate physical fit, mass,
strength or flight suitability. Check actual tubes and print fit yourself.

Why this shape was chosen:
SWAT image shows long slender straight-taper nose with rear cylinder. Estimate40mm cylinder+150mm cone; molded tail cone supplied with original is a separate aft component and excluded. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:
- profile.stations_mm
- shoulder_diameter_mm
- shoulder_length_mm

See MODEL_RECORD.json for the complete original source record and evidence.
Sources:
https://www.rocketshoppe.com/info/Estes_Nose_Cone_Reference_10.1.pdf
https://www.spacemodeling.org/jimz/est2017.htm

The retained Apache 2.0 license applies to the OpenRocket source database
where used. It is not a new license for this entire model library.
Independent recreations; no Estes affiliation or manufacturer verification.

Full library, CAD source and original notes:
https://iterarocketry.com/nose-cones
Support: info@iterarocketry.com
