Aerobee 150

Files included

• 15 STL files in millimeters — including 2 fit coupons
• Individual editable STEP parts and an assembled STEP reference
• Separate multipart print-layout 3MF and assembled reference 3MF — geometry only
• Editable CadQuery source, parameters and regeneration instructions
• Assembly guidance, historical source notes, CAD previews and digital QA evidence

Version: Revision A — Prototype · November 5, 2026. Dimensions are in millimeters.

Use the print-part STL or 3MF files for slicing. The assembled reference shows the complete model and is not a one-piece print. STEP files open as solids in CAD software; the supplied source and parameters let you regenerate the parts.

Historical configuration

Three-fin vehicle with inert booster. Sourced dimensions and estimated details are distinguished in the package notes.

Before printing

Dimensions & fit

1:24 scale; 377.412 mm assembled height; 15.875 mm nominal main body diameter. Configuration: Three-fin vehicle with inert booster.

Build volume

Modular files and a separate print-layout 3MF are included. Check every part and rearrange the layout for your actual printer; no printer envelope has been physically validated.

Material

Filament, printer, nozzle and calibrated fits remain to be selected and physically tested.

Orientation & supports

Print both fit coupons first. Shells are upright, fins flat and the compact cap flat plug face down. Inspect the interstage upper ring and cap bridge for support needs. The booster is an inert, permanently joined display assembly.

Printer settings

Nominal body and nose wall target: 1.2 mm. No tested printer profile, layer height or infill is supplied. The model has no functioning staging or propulsion hardware.

Hardware

Adhesive and any display or recovery cord are not supplied. No motor mount, motor, launch hardware or flight recovery system is included. The cap, bond and cord attachment have no qualified load rating.