Vertical wall mount
Choose a truss or curved-arm bracket with an 18, 24 or 29 mm motor-tube peg. Check body, fin and retainer clearance. Mounting hardware is included.
- Measure
- Motor-tube opening
- Also check
- Wall clearance and display weight
Rocket fit finder
Find a home for your rocket.
Compare wall mounts, cradle pairs and desktop stands. Choose your display style, then check the fit for your own build.
Choose where it will live
On the wall or on the desk?
Start with the display style. Then check the measurement that matters for that product.
Horizontal cradle pair
Two supports hold the body. Choose a pair for a 3-inch or 4-inch body, or a bundle containing both pairs.
- Measure
- Outside body diameter at the supports
- Also check
- Fin clearance, support spacing and display weight
Desktop display stand
A freestanding option with an 18, 24 or 29 mm motor-tube peg. Choose a single stand or a 3-pack. The footprint varies with peg size.
- Check your fit
- Motor-tube diameter, rocket length and display weight
- Also check
- Space around the fins and the stand’s footprint
These are starting points for selection. Confirm your own rocket’s measurements and installation; the guide does not establish a tested load rating.
Vertical wall mounts
Look up your rocket’s starting size.
Use the stock kit as a starting point, then check your own motor tube and clearances. Modified and reissued kits can differ.
Motor tube first. Clearance next. The vertical mount’s peg is reversible for different body clearances. Match the motor-tube diameter, check both orientations, and confirm the rocket clears the wall. Modified and reissued kits can differ from the original.
Alpha / Alpha III
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
18 mm motor tubeView 18 mm mount →
Der Red Max
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
18 mm motor tubeView 18 mm mount →
Big Bertha
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
18 mm motor tubeView 18 mm mount →
Mars Snooper
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
18 mm motor tubeView 18 mm mount →
Interceptor
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
18 mm motor tubeView 18 mm mount →
Crossfire ISX
Tandem-X set 001469
Check motor-tube diameter and fin/retainer clearance on your build.
Manufacturer specifications ↗18 mm motor tubeView 18 mm mount →
SR-71 Blackbird
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
18 mm motor tubeView 18 mm mount →
Viking
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
18 mm motor tubeView 18 mm mount →
Fat Boy
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
18 mm motor tubeView 18 mm mount →
Hijinks
Rascal & HiJinks set 001499
Check motor-tube diameter and fin/retainer clearance on your build.
Manufacturer specifications ↗18 mm motor tubeView 18 mm mount →
Mean Machine
Kit 001295
Long airframe: confirm wall clearance and display weight as well as motor-tube size.
Manufacturer specifications ↗24 mm motor tubeView 24 mm mount →
Super Orbital Transport
Kit 007314
Check motor-tube diameter and fin/retainer clearance on your build.
Manufacturer specifications ↗24 mm motor tubeView 24 mm mount →
Amazon
Tandem-X set 001469
Stock Amazon from the Tandem-X set uses an 18 mm motor tube.
Manufacturer specifications ↗18 mm motor tubeView 18 mm mount →
Hi-Flier XL
Kit 003226
Stock XL uses 24 mm C11, D12 or E12 engines. The smaller Hi-Flier is a different kit.
Manufacturer specifications ↗24 mm motor tubeView 24 mm mount →
Big Daddy
Check your kit version
Check motor-tube diameter and fin/retainer clearance on your build.
24 mm motor tubeView 24 mm mount →
Super Big Bertha
Check your kit version
Different releases use different motor mounts. Send the kit number or measure your motor tube before selecting a mount.
Version check neededConfirm my version →
No matching model yet.
Try a shorter name or clear the size filter. You can also send your model and measurements for help.
29 mm, a mini motor tube or a custom build?
Explore the 29 mm mount for a matching motor tube. For a 13 mm peg, unusual tail cone, long airframe or unlisted model, send the dimensions so we can confirm the arrangement.
This is a display-mount size guide, not a flight-engine recommendation or a claim that every kit has been physically tested with an ITERA mount. Check your own build and kit instructions. Manufacturer links are provided where available.