Nose cones.
Pick your profile.

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The source says this escape-motor plug is cylindrical with turned ridges and has no shoulder. Two circumferential collars and blunt taper reproduce that morphology within the source envelope; ridge spacing guessed.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNP-41_70540. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The source identifies an Apollo escape-tower nozzle, not a nose. A throat and flared exit reproduce nozzle morphology; their proportions are guessed inside the published envelope.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Nozzle throat, lip and shallow exit recess

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BTC-3_70530. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Mini-BOMARC ramjet nacelle inferred as an annular intake around a central spike. Published overall dimensions retained; intake station and spike ratios guessed.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Inlet recess and central-spike proportions

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-5BA_70210. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

The source explicitly gives a 0.810-inch maximum flare and 2-inch length for Red Alert. The BT-5 seating base grows to that maximum, then narrows as a rounded ogive; station spacing is guessed.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Flare location; unsubstantiated traditional part name

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-5RA_70217. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies a BT-20 blow-molded nose shared by three kits. Estimate a rounded elongated 3.5-caliber sport nose; exact mold contour remains uncertain. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_071095_FOXFIRE. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies Paveway III. Reconstruct the distinctive necked rounded seeker head on a reducing adapter, not the older Cherokee-D nose occupying the same kit number. Seeker proportions are educated estimates. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_060567_PAVEWAY. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Use 2.875 inch exposed-length estimate and 0.5 inch shoulder; X-Ray photos show a long pointed injection-molded sport nose. Exact tip radius and length convention remain estimated. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_072602_PNC20A. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

SAROS is modeled as the documented BT-20 adapter plus long slender BT-5-size upper cone, approximating its compound shoulder/neck silhouette. Total length and adapter breakpoints are estimated. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071006_PNC20ED. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The 1969 catalog silhouette shows a broad Spaceman head with nearly parallel sides and a rounded crown. Published maximum diameter and length retained; neck blend and crown proportions estimated.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-20P_70238. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Shoulderless Mercury parachute-compartment nose is modeled as a short cylindrical segment with a rounded crown, preserving source diameter and length. Curvature and barrel fraction are guesses.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PSM-1_71030. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

1963 photograph G shows a long spike with a short cylindrical lower section. Published dimensions retained; base ledge and long taper proportions estimated from the photograph.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PNC-40G_1963. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm gives BT-5 shoulder and 0.882 inch base diameter, with Honest John-like profile. 2005 catalog p10 verifies the flared pointed nose. 65 mm exposed length and flare stations estimated; old Pegasus kit image rejected. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_060620_060621_FIRESTREAK. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies the Shuttle1284 SRB part in the BT-46 group. An ST-8/BT-46-family23.064mm outer diameter and22.4mm nominal shoulder are assumed. A short barrel and rounded cone reproduce the SRB forward cap;36.5mm exposed length and all profile breaks are guesses.

Estimated fields:

• Overall exposed shape length
• Meridian stations and tip shape
• Nominal shoulder diameter and length
• Detail dimensions and positions

Exterior solid estimate only; small mold details, internals and recovery fittings omitted. Tube-family dimensions and visual analogs do not establish exact original fit.

Reference identity: HIST_PRP84_SHUTTLE_SRB. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

1963 catalog photograph F resembles a short stepped conical plastic nose with a wider base flange. Published total-minus-shoulder dimensions retained; flange height and narrowing stations inferred visually.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PNC-40F_1963. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Choose Brohm/source-comment 4.25-inch length over contradictory XML 2.625-inch length and erroneous wall value. Related PNC-50Y morphology supports a long ogive; its precise stations remain guessed.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Chosen 4.25-inch length resolves contradictory source values

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PRP-1H_032487_032492. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The source identifies a flared Apollo capsule and gives maximum diameter 1.360 inches. A heat-shield rim, conical command-module body and flat docking top are estimated within the published 1-inch exposed length.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Heat-shield and docking-neck proportions

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-2_70200. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Choose the source-comment Semroc interpretation: 4.5-inch exposed length, 1.174-inch maximum diameter, approximately 1.5-inch flared transition plus 3-inch ogive. This resolves the conflicting XML 5-inch/1.3-inch values only for this labeled estimate.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Chosen 4.5-inch length and 1.174-inch maximum diameter from conflicting references

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-50BD_70260. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Kit drawing shows a broad faceted cabin rather than a round needle nose. Rectangular canopy block and chine shelves approximate the distinctive hull; panels and slanted window facets are simplified. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071000_ORION. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

BOMARC ramjet nacelle uses a stepped annular lip and central conical spike. The source's simple-cone simulation approximation is replaced by this guessed inlet morphology at the published envelope size.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Inlet recess and spike width

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-50BA_70257. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Source notes place the ramjet central cone at approximately 0.5 inch. At the adopted 2.75-inch catalog length, the final 0.5 inch is a conical spike behind a guessed annular lip; aft pod taper is estimated.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Lip depth and aft tapered body stations

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-50BC_70258. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Stealth kit facecard shows a broad flattened aircraft nose and cockpit. Round mating core plus broad chine plates approximate the mold; distinct from current 072655 PNC-50A. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072044_PNC50A_STEALTH. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Orbiter nose estimated with a blunt rounded core, raised cockpit and lateral chine shelves. Shoulder fits BT-50; cockpit and chine geometry are intentionally simplified. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_033229_SHUTTLE_ORBITER. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

The slender photographed nose is about four to five base diameters long. Interpret the unqualified official 4.125 in as exposed length, using the closely related historic PNC-50YR size as a dimensional anchor. A 19.05 mm shoulder is borrowed from that family. The alternative overall-length interpretation remains possible; this assumption is explicitly an estimate.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_072703. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Official unqualified length is 3.75 in. Assumed overall 95.25 mm, split into 73.025 mm nose and 22.225 mm shoulder using the straight product photo. Smooth rounded taper follows that photo. Modern injection-molded 072655 is distinct from historical Stealth PNC-50A 072044.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_072655. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Official unqualified length is 4.125 in. Assumed overall 104.775 mm because the product photo shoulder occupies about one fifth of total length. The adopted split is 81.75 mm exposed plus 23.025 mm shoulder. BT-50 nominal OD and ID set diameters. This length convention is an educated interpretation, not manufacturer-confirmed.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_072656. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Alien Invader kit images show a narrow swept spacecraft nose with shallow upper cabin. This older PNC-50CA is kept distinct from the later canard/canopy mold reusing 071005. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071005_PNC50CA. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm specifies 4-7/8 inch length and a more prominent canopy than PNC-50SP. Adopt that as exposed length, with the strong canopy seen in the kit photo; uncertain length convention and canopy dimensions are estimated. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_061299_PNC50E. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Original Estes Sandpiper instructions p1 identify PNC-50S 72045 and show a long continuous pointed nose with two opposed finlets. Use an estimated 111.125 mm ogive envelope and two swept finlets. Finlet position, contour, thickness, shoulder and original mold curvature are estimated. This corrects the earlier unsupported neck/collar guess. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072045_PNC50S. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Argosy's nose is an asymmetric cockpit form. Preserve the source envelope and add a broad raised canopy on the aft half of a slender tapered core; canopy dimensions and exact core contour are guessed.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Canopy position and three radii

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PNC-50SP_71001. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Harpoon photo shows a rear expanding skirt, broad cylindrical waist and long truncated cone. Brohm says the main shape matches Centuri PNC-102 with a reduced BT-50 shoulder. Flat forward face preserved. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_072046_PNC50U. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Source specimen measurements give a 1-inch cylinder and 4.75-inch cone, plus 0.5-inch functional shoulder and 0.375-inch rear taper. Those are modeled directly; the unmeasured tip and functional eyelet are omitted.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• No recovered eyelet geometry; external taper simplified

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PNC-50V_PNC-50BB_PN_71027. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Unidentified constituent of the current five-piece sci-fi photograph; no verified historical mold identity. Lower-left pictured nose has a nearly cylindrical rear segment, a swollen middle, and a short sharp forward taper. Estimated BT-50 and 113 mm exposed length. This bulged envelope is intentionally distinct from the longer spike profile.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions
• tube size assignment
• part identity

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_003173_SHAPE_4. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Unidentified constituent of the current five-piece sci-fi photograph; no verified historical mold identity. Long thin upper-right illustrated nose has a cylindrical rear body, shallow taper, distinct change of slope, and narrow pointed extension. Estimated BT-50 family, 135 mm exposed length. The photograph cannot establish the actual part number or exact faceted cross-section.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions
• tube size assignment
• part identity

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_003173_SHAPE_2. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

SR-71 kit photo confirms a long pointed cockpit nose with lateral chines. Chines are integrated shallow wedges rather than aircraft wings; canopy and proportions estimated. The chine forward endpoint is embedded at z106 mm so its finite thickness intersects the core instead of making a zero-thickness tip contact. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072023_SR71. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗ · Reference 3 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm says this different mold reuses 071005 and includes canopy and canards. Star Rider image supports a pointed nose with prominent upper cockpit and small lateral canards; dimensions estimated. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071005_STARRIDER. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Honest John requires a base flare and broad warhead, not a single parabola. Published 1.300-inch maximum diameter retained; the 1969 silhouette and source description guide the widening aft segment and narrowing upper ogive.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-50AD_70252. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Starship Vega's flared rounded cone is modeled with a BT-50 seating base, short widening section and long taper. Published diameter and length retained; flare/rounding locations are estimates.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-50AR_70254. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm describes a two-piece clear plastic egg capsule. Estimate a strongly flared egg shell over25.4mm body with circumferential separation band; transparent material and original latch are omitted. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_061342_061343_EGGSCALIBER. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

The primary Estes2007 catalog page27 describes a molded foam body and a separate detailed plastic roof; therefore only the roof/nominal plug is modeled. The catalog gives3.25-inch body width. An87mm square overhanging roof, shallow arched top, five raised corrugations and vent stub are estimated visually. The24.5mm central HBT-1000-family plug and12.7mm insertion are guesses; the toilet cabin and fins are not part of this nose model.

Estimated fields:

• Overall exposed shape length
• Meridian stations and tip shape
• Nominal shoulder diameter and length
• Detail dimensions and positions

Exterior solid estimate only; small mold details, internals and recovery fittings omitted. Tube-family dimensions and visual analogs do not establish exact original fit.

Reference identity: HIST_PN_061501_061503_PORTA_ROOF. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Brohm explicitly says similar toPRP-1H but shorter3-5/8inch with3/4inch shoulder. Adopt92.075mm exposed length and19.05mm shoulder; despite sci-fi name this is a conventional rounded sport nose. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_033167_STARDESTROYER. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The source calls this a turned 1/242 Apollo capsule/escape assembly. The broad command module, narrow tower stem and escape-motor head are preserved as distinct axial sections; detail spacing is an explicit estimate.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Capsule-to-tower proportions; solid simplified tower representation

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-52AG_70268. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Thor-Agena's short payload capsule is estimated as a stepped cylindrical fairing, conical upper section and flat sensor cap. Source dimensions retained; individual stations are guessed because no detailed profile is available.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-52G_70270. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm explicitly says identical shape toHarpoonPNC50U except largerST10shoulder. Reuse the estimated compoundtruncated silhouette with tube-specificbase/shoulder; visible shape anchored byHarpoonkitphoto. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_072102_PNC102. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Brohm explicitly gives3-1/8inch blunt-ogive length, shorter thanPNC1090. Adopt length as exposed; tubeOD and nominal shoulder fromHBT1090family with estimated shoulder length. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_072626_HIJAX. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Brohm gives4-5/8inch length and groups072630/072634/072636/072663 as color variants of same nose. Use one long rounded-ogive estimate; each color identity maps to this geometry. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_07263X_PNC1090. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Black Star Voyager nose is documented as a ribbed 4:1 ogive. Adopt 5.25-inch exposed length and source-comment 0.75-inch shoulder; eight narrow axial raised ribs are a guessed interpretation of the missing rib geometry.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Rib orientation/count/height/width
• Adopted source-comment shoulder length 0.75 inch over XML0.375

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: 72773. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Estimate the Sidewinder short cylindrical radome base and pointed curved seeker tip, distinct from a long generic sport ogive. Fine seeker window and molding details omitted. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072683_SIDEWINDER. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The source describes a rounded cone with an approximately 0.5-inch cylindrical aft section. That barrel length is retained; the straight main taper and short rounded tip replace the known-wrong ellipsoid approximation.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Tip rounding; source shoulder length was itself estimated

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-55AM_70280. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Source identifies a two-section Vostok cone. Both tapers are included; the join at 52% of exposed length and 67% of base radius is an educated guess. Source nominal shoulder retained although source admits it was unknown.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Shoulder length adopted from database placeholder
• Biconic breakpoint and intermediate diameter

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-55BE_70277. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Explorer Aquarius facecard shows an enlarged rounded observation pod ahead of a narrower stalk. Estimate the bulb and slight canopy bulge; dark viewport is cosmetic and omitted. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_KIT2016_EXPLORER_AQUARIUS. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies original Interceptor nose and the blow-molded Vindicator counterpart. Vindicator photo supports long pointed nose and raised cockpit. Upper cockpit shape is estimated; original molding facets simplified. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PNC55EJ_INTERCEPTOR. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Source describes a BT-55 ogive with a large bulbous canopy and an approximately 4-inch length estimated from kit scans. Add an asymmetric elliptical cockpit; canopy location and dimensions are guesses.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Canopy center and radii; source length already estimated

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PNC-55_Xarconian_072689. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Odyssey photographs show the unusually long multi-neck/collared sci-fi mold with upper cockpit and detail bands. Stations capture its defining sequence; overall196 mm and every fine detail are estimated. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071036_PNC55CB_ODYSSEY. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Sea Dart is an inlet nacelle with compound taper and central spike. Approximate the wider aft body, smaller annular intake and conical spike using published envelope dimensions; exact stations and inlet recess are guessed.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Intake step, recess and spike proportions

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PNC-55D_71038_Sea_Dart. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Sandhawk slender sounding-rocket radome estimated as short cylindrical base followed by long taper. Brohm connects original and Terrier/Sandhawk reissue; exact contour unavailable. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PNC55EK_SANDHAWK. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Source specimen gives a 3.375-inch Exocet nose, 1-inch functional shoulder and total1.375-inch shoulder envelope. Preserve the source main size, include the rear shoulder taper and a subtly blunt tip; exact contour and tip flat are guesses.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Rear shoulder taper terminal diameter; tip flat

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PNC-55EX_PN_71031. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Honest John kit photo shows a smooth flared warhead wider than BT-55, then narrowing to a point. 150mm length and 44.8mm maximum diameter estimated from image proportions. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_072058_PNC55HJ. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Interceptor II images and 2005 Shuttle Xpress photo show an elongated pointed nose with shallow angular cockpit. Estimate small side chines and canopy; decals/windows are omitted. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072054_PNC55IR. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗ · Reference 3 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Missile seeker estimated as a short rounded radome with a cylindrical base and collar. Kit identity from Brohm; exact shape/length remains an educated guess. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_060552_PYTHON4. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies this separate blow-molded nose. Estimate a long missile radome with a short constant-diameter base/collar; exact contour low confidence. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072701_RECRUITER. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Unidentified constituent of the current five-piece sci-fi photograph; no verified historical mold identity. Top illustrated part has a broad angular cockpit and a co-molded rear nozzle. Estimate BT-55 shoulder and a 96 mm cockpit body. Represent its angular raised deck as a broad wedge with a shallow rectangular panel. The separate rear nozzle visible in the molding is excluded from nose geometry. The axisymmetric underside is an approximation; this does not assert an exact rectangular mold section.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions
• tube size assignment
• part identity

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_003173_SHAPE_1. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Unidentified constituent of the current five-piece sci-fi photograph; no verified historical mold identity. Lowest nose on the pack artwork is a long multisection molded part with successive collars and a pointed end. Estimated BT-55 front nose with a segmented 132 mm exposed body. Only the nose-side collars are represented; the extra segmented rear adapter visible behind the seating shoulder is a separate cut-away accessory. Exact separation line is uncertain.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions
• tube size assignment
• part identity

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_003173_SHAPE_5. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Unidentified constituent of the current five-piece sci-fi photograph; no verified historical mold identity. Rounded mid-right illustrated nose has a large elongated raised oval canopy, a small forward dorsal bump, and broad shoulder. Estimated BT-55, 103 mm exposed length. Similarity to historical cockpit noses is not sufficient to assert a mold identity.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions
• tube size assignment
• part identity

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_003173_SHAPE_3. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Original Estes SDI Satellite instructions PDF pp2/5 (printed1/4), especially step14, show a rounded reducing rear fairing, narrow neck, two faceted instrument-bus sections and a thin blunt forward probe. Reconstruct those distinct features with estimated 111 mm exposed length and simplified rounded boxes/panel rails. All section lengths, polygon approximation and shoulder fit are estimates; painted circular details and recovery eyelet omitted. This replaces the earlier unsupported pointed-fairing guess. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_KIT2003_SDI_SATELLITE. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

2005 manufacturer back cover shows Eagle rounded short crew capsule with a distinct rear band and smaller upper cylinder. Estimate capsule steps and dome from those proportions. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_060888_EAGLE. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Cyclone image shows a stubby rounded pointed plastic nose; Brohm identifies CenturiPNC132. Estimate80mm external ellipse withST13matingdiameter; rotating-recoveryfins belongtoairframe, notnose. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_072132_PNC132. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

OpenRocket research comments document the shared old Centuri/Enerjet capsule: 4.60 inch reducing transition, 2 inch ST-20 center tube and 2.5 inch upper cap. Reconstruct complete external fairing; A models only upper cap. Shoulder fit and curvature remain estimated. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_EGGCAPSULE_1996_2072. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Omloid is an egg-lofting capsule; estimate a short swollen ovoid shell with joint band and BT-56 mating neck. Distinct from the long classic Eggspress/ST-20 assembly. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_KIT2078_OMLOID. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

LTV Scout instructions show the payload nose plus two transitions as one supplied set. Estimate a stepped cylindrical fairing/taper atopSBT139; external set represented as one reference body, without separate assembly sockets. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071067_PNC1287_SCOUT. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Manufacturer2005 pp16/36 show short broad Apollo-like stepped conical capsule without escape tower. 39.116mm tube diameter known; cone heights estimated. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_060876_GAUCHITO. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies this historical Apollo assembly and tube family. Its exterior is estimated by scaling the separately documented modern Little Joe II033060 capsule/open-truss estimate to a39.37mm base diameter. This preserves recognizable capsule, four tower legs, bracing and escape motor but is not a claim that the molds were identical. Historical shoulder dimensions, rod gauges and fine details are guessed.

Estimated fields:

• Overall exposed shape length
• Meridian stations and tip shape
• Nominal shoulder diameter and length
• Detail dimensions and positions

Exterior solid estimate only; small mold details, internals and recovery fittings omitted. Tube-family dimensions and visual analogs do not establish exact original fit.

Reference identity: HIST_PN_033110_APOLLO_BT58. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The 1969 capsule silhouette shows a conical lower module with a narrower nearly cylindrical forward section and flat top. Published dimensions retained; Gemini station ratios are estimated.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-60AB_70284. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The1969 catalog gives the6.625-inch exposed length, OD and0.875-inch shoulder length. Shoulder diameter is now explicitly guessed from BT-60 nominal1.595-inch ID under the owner's estimate authorization. Rounded silhouette modeled by an elliptical station curve.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Shoulder diameter inferred from nominal BT-60 tube ID

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-60AH_1969. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Mercury-Redstone capsule includes a heat-shield rim, conical cabin, distinct parachute-compartment neck and rounded upper end. Relative stations and small collar proportions are guessed; catalog dimensions retained.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-60AK_70290. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Mars Lander's shallow rounded/flat-ended nose is approximated with a short seating barrel, broad curved dome and a small flat central crown. Catalog envelope retained; exact dome and crown proportions guessed.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-60AL_70288. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

The 1969 Mercury silhouette shows a conical lower capsule and rounded cylindrical upper parachute compartment. This simpler variant omits the additional collar represented on BNC-60AK; all station proportions are estimates.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: BNC-60T_70294. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm gives3-1/16inch length and describes a longer PNC-60MX-like shape. Adopt as exposed length, rounded short cone with estimated shoulder; original internal separation mechanism is not reproduced. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_KIT2071_CATO. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Crusader photo shows a relatively short rounded cockpit nose, unlike long needle types. Estimate elliptical external form plus cockpit bulge. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_KIT1961_CRUSADER. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Explorer kit photo shows a short broad spacecraft cockpit with a blunt/flattened end. Flat tip and chine shelves preserve the distinctive shape; exact cross-sections estimated. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_KIT1974_EXPLORER. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm states this blue cap has no shoulder and screws to061692payload section. Model shoulderless rounded cap shell exterior; thread is omitted and diameter/height estimated. Dragonite image under reused2169 is rejected. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_061686_LIQUIDATOR. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

2005 backcover shows short straight cone. Brohm explicitly measures shoulder diameter1.562inch, smaller than standard BT-60; retain39.6748mm. Cone height/shoulder length estimated; wrong old Condor image rejected. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_060901_LUCKYSEVEN. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

X-15 kit image shows a rounded pointed nose with shallow raised canopy. Recreate the nose only; airframe chines and wings remain separate rocket parts. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_KIT0889_X15. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

2005 manufacturerp15 shows long pointed red camera nose with a side instrument panel. Approximate external shell and shallow rectangular camera recess; no electronics, lens optics or working USB/door. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_060864_ORACLE. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

2005 manufacturerp27 photo shows a wide conical ascent cap above a narrow neck. Estimate74mm maximum skirt diameter and61mm height; neckfit remains BT-60 nominal. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_060542_OUTLANDER. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

SCUD-B kit drawing and photo show a short cylindrical base followed by predominantly straight taper with softened tip. Estimate radial breaks and overall length; surface paint bands omitted. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071015_PNC60B. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

2005 manufacturer Renegade image shows a long pointed upper fairing. Estimate 132 mm ogive with subtle seating collar; neither label nor mold is conflated with PNC-60AH. The collar is integrated into the meridian to avoid excessive STEP edge tolerances. Collar extent z7 to z8 mm, radius 21.1 mm, total length and shoulder dimensions are preserved. Outside the collar, resampling shifts the curve by at most 0.0223 mm in radius relative to the previous estimate. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_060541_PNC60CP. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Mini Mars Lander photo supports a short rounded-tip cone and seating band. Use Brohm standard shoulder1.590inch; separate smaller-shoulder RTFversion not substituted. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071017_PNC60MX. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Titan II image shows stepped capsule/adapter shape with narrow forward nose, not a single cone. Estimate Gemini-like taper and narrow end; mold identity differs from balsa Mercury BNC-60T. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071018_PNC60T_GEMINI. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Columbia kit photo confirms bulbous blunt orbiter nose with low cockpit hump. Estimate exterior shape; large shuttle wings and rear cockpit decals are not part of this nose. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072012_SHUTTLE_COLUMBIA. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies BT-60 E-powered SpaceShipOne two-piece nose. Estimate rounded parabolic spacecraft cockpit at smaller tube family; no window holes since they are markings. Larger BT-200 version remains separate. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_061185_061186_SS1E. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

SWAT image shows long slender straight-taper nose with rear cylinder. Estimate40mm cylinder+150mm cone; molded tail cone supplied with original is a separate aft component and excluded. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_SUPER_VEGA_SWAT. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

2005 manufacturerbackcover shows a tapered capsule with exceptionally long narrow forward probe. Estimate capsule body, neck collar and pointed probe separately in stations. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_060881_THUNDERSTAR. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

The Green Eggs instructions identify 030110 as the combined molded nose H and adapter I that are cut apart. Model only the nose portion after that cut; the rear adapter is not another nose. The photographed exposed part is roughly 3.4 base diameters. Borrow 45.6184 mm outside diameter and 44.45 mm shoulder diameter from the historic BNC-65L reference as nominal fit estimates; adopt 154 mm exposed length and a 25.4 mm shoulder. Official Green Eggs diameter is rounded 1.8 in / 46 mm.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_030110. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗ · Reference 3 ↗ · Reference 4 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies1.800inch tube family sounding-rocket radome. Estimate3.75caliber tangent ogive, subtly rounded tip; axial dimensions remain lowconfidence. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_061740_DREGION. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

This is the Mercury heat-shield/base subpart, not a pointed nose. A short rim and truncated cone preserve its aft-capsule role; source dimensions retained and station ratios guessed.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: PSM-1_71032. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm associatesPython with Terrier booster family. Estimate long missile radome with short rear cylinder and seam collar;1.835inch tube OD retained as nominal. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072660_PYTHON. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

The complete current 1:200 assembly includes the broad lower stage transition, S-IVB cylinder, SLA taper, service module, command module and molded escape-tower spire. Manufacturer Saturn V RTF diameter 1.98 in / 50 mm scales the widest base. Relative axial stations and 32.2 mm by 20 mm shoulder are estimated from the straight replacement photograph. Color bands are not grooves. This product depicts a solid simplified tower, unlike the larger Little Joe II open lattice.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_071061. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Estimate enlarged Interceptor cockpit shape scaled to2inch body, distinct from smallerBT55version. Brohm identifies the E-powered reissue; old Black Hole Space Probe under reused1350 is explicitly rejected. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_062115_INTERCEPTOR_E. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

2005 catalog/kit image shows swollen rounded pointed crew nose with circular window markings. Estimate102mm shell length and very shallow upper hump; decals are omitted. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_060884_SS1. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗ · Reference 3 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Primary Estes1976 instructions and face-card image show a broad conical transition, narrow cylindrical upper payload and very slender Explorer-1 tip. Nominal ST-20 base diameter51.8mm is retained. The208mm exposed assembly, shoulder, transition lengths and small upper diameters are educated image-based estimates; separate molding details are simplified into one external solid.

Estimated fields:

• Overall exposed shape length
• Meridian stations and tip shape
• Nominal shoulder diameter and length
• Detail dimensions and positions

Exterior solid estimate only; small mold details, internals and recovery fittings omitted. Tube-family dimensions and visual analogs do not establish exact original fit.

Reference identity: HIST_JUPITER_C_ST20. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies the ST-20 Mercury capsule and primary Estes1921 kit images show a conical black capsule and a three-legged open escape tower. Use a51.8mm base,75mm capsule and211mm capsule-to-tip height as educated estimates. The three main struts, triangular crossmembers, diagonal bracing, escape motor and three outward dummy nozzle shapes follow that morphology. All feature sizes, nominal shoulder and simplified capsule corrugations are guesses.

Estimated fields:

• Overall exposed shape length
• Meridian stations and tip shape
• Nominal shoulder diameter and length
• Detail dimensions and positions

Exterior solid estimate only; small mold details, internals and recovery fittings omitted. Tube-family dimensions and visual analogs do not establish exact original fit.

Reference identity: HIST_PN_034125_MC1921. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm's BT-67 Shuttle1284 entry is the external-tank forward cap. A51.8mm ST-20/BT-67-family seating diameter is assumed. The photograph/instruction role supports a rounded pointed tank dome;73mm exposed length, nominal shoulder and intermediate contour are estimates.

Estimated fields:

• Overall exposed shape length
• Meridian stations and tip shape
• Nominal shoulder diameter and length
• Detail dimensions and positions

Exterior solid estimate only; small mold details, internals and recovery fittings omitted. Tube-family dimensions and visual analogs do not establish exact original fit.

Reference identity: HIST_SHUTTLE_ET_BT67. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

The Estes2005 catalog page18 directly shows the model-kit cap: broad rounded dome with a narrow raised button. BT-70 gives the nominal56.31mm seating diameter. The45mm exposed height, dome breakpoints, small button and shoulder are estimates from the catalog image. This models only the inert exterior cap.

Estimated fields:

• Overall exposed shape length
• Meridian stations and tip shape
• Nominal shoulder diameter and length
• Detail dimensions and positions

Exterior solid estimate only; small mold details, internals and recovery fittings omitted. Tube-family dimensions and visual analogs do not establish exact original fit.

Reference identity: HIST_PN_060558_060559_BLU97B. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm identifies this historical Apollo assembly and tube family. Its exterior is estimated by scaling the separately documented modern Little Joe II033060 capsule/open-truss estimate to a56.31mm base diameter. This preserves recognizable capsule, four tower legs, bracing and escape motor but is not a claim that the molds were identical. Historical shoulder dimensions, rod gauges and fine details are guessed.

Estimated fields:

• Overall exposed shape length
• Meridian stations and tip shape
• Nominal shoulder diameter and length
• Detail dimensions and positions

Exterior solid estimate only; small mold details, internals and recovery fittings omitted. Tube-family dimensions and visual analogs do not establish exact original fit.

Reference identity: HIST_NCK29_APOLLO_BT70. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Titan IIIE kit image shows a flared fairing with long cylindrical barrel and conical forward cap. Estimate flare and barrel lengths from image; no guess of true manufacturing radii. Redundant collinear z179 mm station removed for valid CAD face cleaning; the external line is unchanged. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_KIT2019_TITANIIIE. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Official diameter 2.5 in controls scale. The straight manufacturer photo gives exposed length about 3.4 diameters and shoulder about one diameter. Adopt 8.5 in exposed and 2.5 in shoulder; borrow the 61.468 mm shoulder diameter from the related PSII 72413 reference as a fit estimate. The narrow longitudinal raised detail visible midway on the front side is represented by a small blended fairing; exact ridge cross-section is uncertain.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_073236. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm linksImpulse/MaxiForce/NCRInterceptorG. Adopt manufacturer1993ProSeries2.5inch nominal family and estimate3.4caliber rounded ogive. Distinct identity from modernPSII72413. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_072690_NC25P1. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

1993 manufacturercatalog specifies2.5inch Jayhawkbody and separate molded conduit. Estimate a pointed ogive with small ventral conduit root; sourceidentity is original2085, not current073236scaledpart. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_KIT2085_JAYHAWK. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Brohm explicitly describes a foam ball without a conventional body-tube mate. Use a 63.5 mm estimated spherical ball, sampled at 96 meridian intervals; no artificial shoulder. The ball size is an estimate. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_061802_POPFLY. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Maxi Honest John photo shows enlarged bulbous/flared warhead ahead of narrower body. Estimate90mm maximum diameter,282mm length and broad transition; no substitution by simple BT-80 ogive. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_071065_MAXI_HONESTJOHN. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Rock-It is represented as a rounded irregular rock-like cluster rather than a smooth sport nose. Lobes and stone contour are low-confidence educated estimates; original stone texture is omitted. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_061465_ROCKIT. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Silver Comet is estimated as a fat retro spacecraft nose with integral canopy, not the plain Super Big Bertha ellipse. Dimensions and canopy proportions inferred from family/type; no measured original available. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_072664_PNC80SC. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

medium evidence confidence. This describes the available references, not a numerical tolerance.

Source photogrammetry describes a 0.65-inch reverse flare from 3.0 to3.1-inch diameter and a 16.75-inch long cone. These compound proportions are used instead of the former single-cone simulation approximation.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Photogrammetric source dimensions remain estimates

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: 72753. Complete dimensions and source notes are included in the download.

Reference 1 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Manufacturer explicitly gives 3 in outside diameter and 3 in shoulder length. Exposed length estimated as 10 in from the oblique photograph, approximately 3.3 base diameters; rounded tip and near-tangent base follow the silhouette. Shoulder OD 74.168 mm is borrowed as an estimate from the existing same-diameter Big Daddy 72695 reference. This is a different nose shape from Big Daddy 072695.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_072304. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

2005 backcover shows broad orange straight-taper crew cone with small flat circular tip. Base diameter follows named3.21inch tube family; length and flat-tip diameter estimated. Historical identity is supported by Brohm; dimensions and morphology beyond the cited facts are educated design estimates.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_060893_RUBICON. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Estes 2016 catalog gives kit 7227 diameter 3.42 in (86.868 mm). The primary Estes instruction sheet page 7 straight side view scales the capsule-to-tip distance to about 263 mm and page 6 explicitly shows a four-legged open truss, bracing, flared motor base and separate motor tube. These features are reconstructed as connected solid rods and cones, with the empty tower center retained. Capsule stations, nominal 84.5 mm shoulder, 25.4 mm shoulder length, rod thicknesses and all detail coordinates are estimates. This model includes only the nose capsule/tower assembly, not the body wraps, fins, or other sprue components.

Estimated fields:

• exposed length mm
• profile stations
• shoulder diameter mm
• shoulder length mm
• feature dimensions

Photo perspective, molding revisions, and unmeasured shoulder fit remain uncertain. Fine mold seams, recovery eyelets and hollow construction are outside this solid exterior scope.

Reference identity: CURRENT_033060. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗ · Reference 3 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Pershing kit photo shows a long two-slope conical reentry assembly with rear seating section. Estimate axis stations from known BT-101 base diameter and image proportions; shell joint modeled as subtle collar. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm
• features

Reference identity: HIST_PN_071040_071041_PERSHING. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Maxi V-2 primarykit image supports classic pointed curved warhead, approximately2.3diameters long. Long tangent-ogive estimate preserves V-2 form; exact source curve and shoulder unknown. Kit facecard/instruction images were visually inspected; proportions are estimated, not measured from a calibrated drawing.

Estimated fields:

• profile.stations mm
• shoulder diameter mm
• shoulder length mm

Reference identity: HIST_PN_071050_PNC101F_V2. Complete dimensions and source notes are included in the download.

Reference 1 ↗ · Reference 2 ↗

Revision B — Estimated · Solid exterior reference. No print clearance, original hollow interior or recovery attachment is built in.

low evidence confidence. This describes the available references, not a numerical tolerance.

Mega Der Red Max source substitutes close LOC dimensions. For this guess choose the description's12.5-inch exposed length over XML12.75, keep nominal4-inch diameter and give the broad ogive a small flat blunt tip.

Estimated fields:

• Meridian station locations and intermediate radii
• Unmeasured tip/collar details
• Chosen12.5-inch length; LOC-derived shoulder; blunt-tip diameter

Estimated exterior only. Minor molding details, hollow interiors, attachment hardware and material behavior are not reproduced.

Reference identity: 72415. Complete dimensions and source notes are included in the download.

Reference 1 ↗