Free shipping on orders $100+No code needed
Dark gray ITERA mini tube cutter with orange thumb grip, seven orange cartridge assemblies and launch-lug guide insertsEnlarge image ↗

The mini cutter and seven-size cartridge set, shown in dark gray and orange PETG.

ITERA / Small-tube cutter + seven cartridges

Mini Tube Cutter — Complete Seven-Size Set

Complete set price$49.95

A compact handheld cutter for paper launch lugs and small rocket tubes. Includes seven cartridge sizes, from 1/8-inch launch lugs through thin-wall and thick-wall 29 mm motor tubes.

  • Cutter + all seven cartridge sizes
  • 1/8″, 3/16″ & 1/4″ launch lugs
  • BT-20, BT-50 & two 29 mm fits
  • PETG · Manual thumb-controlled blade
Choose quantity ↓

Get the complete mini set

One mini cutter and all seven cartridge sizes for $49.95. Matching guides and tightening parts are included; no size selection is needed.

Current dispatch estimate: about 4 days after ordering.Usually 2–3 days from order to dispatch. Timing varies with order size and our production queue; shipping transit time is additional.Estimate updated October 5, 2026.

Loading current price and options…

Free shipping on orders $100+ after discountsNo code needed. Shipping details →

Shipping on orders under $100 is calculated at checkout. For a required arrival date, contact us before ordering.

Need larger tubes? Explore the 3-inch cutter →

Every included cartridge

One cutter and one cartridge in each of these 7 sizes. This is the complete bundle; no size selection is needed.

  • 1/8-inch launch lugs
  • 3/16-inch launch lugs
  • 1/4-inch launch lugs
  • BT-20 / 18 mm motor tube — 18.69 mm tube OD
  • BT-50 / 24 mm motor tube — 24.79 mm tube OD
  • 29 mm thin-wall motor tube — 29.87 mm tube OD
  • 29 mm thick-wall motor tube — 30.73 mm tube OD

Product details

Included
Mini cutter, seven cartridge sizes, and matching guides and tightening parts
How to cut
Fit the matching cartridge to the tube and lock it into the cutter. Advance the blade gently with your thumb while rotating the tube and cartridge. Start with a light score, then deepen the cut over additional passes.
Blade compatibility
The blade carrier is designed for an Excel #11 hobby blade
Color and material
Dark gray handle with orange cartridges and thumb grip, printed in PETG as pictured
Cartridge compatibility
These cartridges fit the mini cutter; they are separate from the cartridges for the larger ITERA cutters
Product type
Physical cutter set; STL files are not included

Before you order

Launch-lug sizes refer to the launch rod, not the outside of the lug. Match your lug to the appropriate front guide; outside diameters vary by brand. Motor-tube sizes are also nominal: compare the actual tube outside diameter with the reference sizes listed above. The two 29 mm cartridges accommodate different wall thicknesses.

For an uncertain fit, send us the tube manufacturer and measured outside diameter before ordering. This mini set is for paper tubes and launch lugs.