WAC Corporal

Files included

• 10 STL files in millimeters — including 2 fit coupons
• Individual editable STEP parts and an assembled STEP reference
• Separate multipart print-layout 3MF and assembled reference 3MF — geometry only
• Editable CadQuery source, parameters and regeneration instructions
• Assembly guidance, historical source notes, CAD previews and digital QA evidence

Version: Revision A — Prototype · November 5, 2026. Dimensions are in millimeters.

Use the print-part STL or 3MF files for slicing. The assembled reference shows the complete model and is not a one-piece print. STEP files open as solids in CAD software; the supplied source and parameters let you regenerate the parts.

Historical configuration

1945 sustainer; Tiny Tim not included. Sourced dimensions and estimated details are distinguished in the package notes.

Before printing

Dimensions & fit

1:15 scale; 328.507 mm assembled height; 20.659 mm nominal main body diameter. Configuration: 1945 sustainer; Tiny Tim not included.

Build volume

Modular files and a separate print-layout 3MF are included. Check every part and rearrange the layout for your actual printer; no printer envelope has been physically validated.

Material

Filament, printer, nozzle and calibrated fits remain to be selected and physically tested.

Orientation & supports

Use upright shells, flat fins and the compact cap flat plug face down. Print both fit coupons first and inspect the cap opening and closed nose tip in the slicer.

Printer settings

Nominal body and nose wall target: 1.2 mm. Fine exterior details and model interfaces include labeled estimates. No tested layer height, nozzle or printer profile is supplied.

Hardware

Adhesive and any display or recovery cord are not supplied. No motor mount, motor, launch hardware or flight recovery system is included. The cap, bond and cord attachment have no qualified load rating.